• The Junior Adjustable "Complete Kit" has two Base castings and two Arm castings. The Base castings strap to the light pole with included stainless steel Quick-Release banding. The Arm castings each have a 13/16" diameter solid fiberglass rod epoxied into them to support the banner. Included are four 3/8" wide x 7/8" long self-locking bolts to secure the Arm Units to the Base Units. A "Complete Kit" includes everything needed to install a banner top and bottom hem on a light pole.
  • Heavy Duty Construction: Cast of aircraft quality 356 aluminum alloy, with T51 heat treatment.
  • All rust-resistant components.
  • The 1 1/2 " width and the 6" length of the JR Base Unit provide lateral and vertical stability for banners smaller than 30" x 84".
  • It fits round, square, octagonal and fluted poles over 1 1/2 " in diameter. It can be lag-bolted to wooden poles or flat surfaces.
  • The Base Unit does not require a confusing "top end up" mount as with some systems on the market. It doesn't matter which end of the base unit is up or down.
  • Two 13/16" diameter unidirectional fiberglass rods are epoxied into the Arm castings providing flexibility while maintaining strength. The canted rod design keeps the banner taut, yet absorbs the wind energy to reduce stress on the banner and the light pole - up to 25% wind-load reduction.
  • Easy to install and maintain. Up to 2" of banner length adjustment for proper tensioning. Banding guides on the Base Unit allow up to two wraps of 3/4" wide banding to secure it to the pole.
  • Convenient banner tie-down on the Arm Unit to secure your banner.
  • Banners can be installed or removed without disturbing the main (Base) casting.
  • Safety features built in. No additional safety or lynch-pins are required. No moving parts to wear out or fail. Two 7/8" long by 3/8" wide self-locking bolts pass through the adjustment slots in the Arm Unit and thread into the Base Unit. The Arm Unit cannot be separated from the Base Unit unless both bolts are completely removed. The self-locking bolts are very easy to access and work with. THIS IS THE ONLY BANNER BRACKET SYSTEM ON THE MARKET WITH THIS PATENTED FEATURE.
  • Stock sizes for 18", 24", 30" and 36" wide banners. Custom rod lengths available up to 36".
  • Ten Year Warranty when properly installed and maintained.
  • Two kits will install two banners, one on either side of the pole, sharing the same banding.
  • Standard Packaging: 7 kits per carton.
TOP